Name | Value |
Product Description | QSFP-DD SR8 |
Data Rate | 400Gbit/s |
Reach | 100m |
Tx | VCSEL Array |
Rx | PIN |
Connector | MTP/MPO-16 MM |
SLQS-DD-400G-SR8 is a parallel 400Gb/s Quad Small Form Factor Pluggable--double density (QSFP-DD) optical module. It provides increased port density and total system cost savings. The QSFP-DD fullduplex optical module offers 8 independent transmit and receive channels, each capable of 53.125Gb/s operation for an aggregate data rate of 400Gb/s on 100 meters of OM3 multi-mode fiber.
An optical fiber cable with an MTP/MPO-16 connector can be plugged into the QSFP-DD SR8 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a QSFP-DD MSA-compliant edge type connector.
The central wavelengths of all the 8 parallel lanes are 850nm. It contains an optical MPO-16 connector for the optical interface and a 60-pin connector for the electrical interface. Host FEC is required to support up to 70m OM3 multi-mode fiber transmission.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP-DD Multi-Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Package (Form Factor) | QSFP-DD |
Data Rate (typical) | 53.125/CH |
Centre Wavelength | 850nm |
Distance | 100m transmission on multi-mode fiber (MMF) OM3 with FEC |
Diagnostics | Digital Monitor |
Transmitter | VCSEL Array |
Receiver | PIN Array |
TX Output Power (dBm) | -6.5~+4dBm |
RX Sensitivity (dBm) | <-6.5dBm |
Low/High Case Temperature | 0°C~70°C |
Voltage Supply (typical) | 3.3v |
Connector | MTP/MPO-16 |