The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 120km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
| Package (Form Factor) | SFP |
| Data Rate (typical) | 1.25 Gb/s |
| Centre Wavelength | 1550nm |
| Distance | 120km |
| Diagnostics | Digital Monitor |
| Transmitter | DFB Laser |
| Receiver | APD photo detector |
| TX Output Power (dBm) | 0~+5 |
| RX Sensitivity (dBm) | -31 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | Duplex LC/UPC |
